milight

Mokungit Touch Screen Light Switch Dimmer Touch Screen Dimmer Light Switch

Find on our online store:

ali express amazon ebay

Features:

1.The control principle: an IC control an LED form a loop (a), the controller IC on the FPCB through the control circuit inside the control to control the LED lights change different effects; such as flashing, chasing, jumping, Happy clockwise, counterclockwise Happy, Happy monochrome, color Happy, single chase from start to finish, running water, simulated lightning; changing effect this section is not limited to the current light bar controller built-in 94 kinds of effects can be based on customer needs , write your own; arranged in the form of screen can display, text, letters, pictures, animations, and so on.
2.Environmental safety: high quality highlight SMD 5050 LED. With small power consumption, resulting in less heat, no glare, impact resistance and other characteristics. Low voltage DC 5V power supply, high security and reliability.
3.Color can be varied by the controller needs to be adjusted according to the customer.
4.Long life: average life expectancy of 50,000 hours.
5.Cutting, welding facilitate freedom: each group of LED to form a loop, you can cut off any tangent meet customer requirements and demand for welding various lengths of light bar along the top.
6.Soft: A soft FPCB board as a substrate, can butt, bending, cutting, and easily fixed to unsmooth surface.
7.Light, thin: suitable for installation in narrow space inside

Please pay attention:

IP30 Non-waterproof

IP65 Waterproof in silicon coating

IP67 Waterproof in silicon tube

 

Share the products:
Facebooktwittergoogle_pluspinterestlinkedinmail
1-10 Meters 16$
10-100 Meters 15.8$
100-1000 Meters 15.5$
Bullet

HX-SZ100-SYNCDIM-TOUCH RF Touch Dimmer HX-SZ100-SYNCDIM-TOUCH, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF remote control. 5 function buttons and 1 dimming ring in the center, all buttons are…

Description

RF Touch Dimmer
HX-SZ100-SYNCDIM-TOUCH, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which was be touched. As the led strip is the same brightness level. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the market need, the synchronization work of more lamps, it is designed the conjunction-sync-work function with RJ45 connecter, user-friendly.

Product Feature

●Adopt PWM technology, and the dimming ring in the center has 128 levels in different brightness value, smooth and flicker-free.
●High watt output design, up to 1*25A/ 300W.
●Easy connection to achieve multiple dimmers sync-work by RJ45 terminal.
●Adopt RF remote control technology and full touch design.
●Designing for: LED constant voltage single color product like LED single color strip.
●2-year warranty.

Technical Parameters

Working temperature -20-60℃
Supply voltage DC12V~24V
Output 1 channel
Connecting mode common anode
External dimension L127*W41*H32 (mm)
Packing size L147*W85*H73 (mm)
Net weight 280g
Gross weight 340g
Output gray 256 levels
Output current <25A*1CH
Max. Output power 300W
Frequency of RF remote control 433.92MHz

Interface Specifications

Direction for use

Adopts RF full touch control, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key Instruction Remarks
ON/OFF ON or OFF in any time
Pause Pause or Continue
Mode The mode will move to next, when touch the key each time 3 modes in total.
Speed/Brightness + The Speed/Brightness will +1, whentouch the key each time Speed for dynamic modes, Brightness for static modes.
Speed/Brightness – The Speed/Brightness will -1, when touch the key each time Speed for dynamic modes, Brightness for static modes.
Color Ring Touch any color temperature which you want

modes in total as below:

NO Patterns Remarks
1 Static 100% light Brightness is adjustable, speed is unadjustable
2 flash Speed is adjustable, brightness is unadjustable
3 fade

Typical Applications
Conjunction diagram :

Power and LED’s connection diagram:

Product information for placing order

Product name Item number
LED Dimmer with RF full touch remote HX-SZ100-SYNCDIM-TOUCH
Payment Policy

the part for the contents of Payment

Shipping Policy

This part for Shipping Policy

Return Policy

This part for the contents of Return Policy

More Details

Applications: 
• Widely used for home, hotels, clubs, shopping malls.
• Architectural decorative lighting, boutique atmosphere lighting
• Extensively applied in Back-lighting, concealed lighting
• Emergency & security lighting, advertisement sign lighting
• Holiday, event, show exhibition decoration.

Installation Instructions: 
• Clean the surface you intend to stick the light strip to
• Peel off the backing strip off the 3M adhesive tape
• Press and hold the light strip firmly against the surface
• Connect the 4-Pin input of the light strip to the 4-Pin output of the Controller
• Connect the DC jack output of the power adapter to the DC jack input of the Controller
• Remove the tab from the battery compartment of the remote control
• Connect your power adapter to your wall outlet. Your light strip is now ready to use.

 

Send Inquiry
Video
Copyright © 2016 Shenzhen Gengyuan Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution