milight

Mokungit Led Wall Dimmer Switch 12v LED Dimmer Wall Switch

Find on our online store:

ali express amazon ebay

Features:

1.The control principle: an IC control an LED form a loop (a), the controller IC on the FPCB through the control circuit inside the control to control the LED lights change different effects; such as flashing, chasing, jumping, Happy clockwise, counterclockwise Happy, Happy monochrome, color Happy, single chase from start to finish, running water, simulated lightning; changing effect this section is not limited to the current light bar controller built-in 94 kinds of effects can be based on customer needs , write your own; arranged in the form of screen can display, text, letters, pictures, animations, and so on.
2.Environmental safety: high quality highlight SMD 5050 LED. With small power consumption, resulting in less heat, no glare, impact resistance and other characteristics. Low voltage DC 5V power supply, high security and reliability.
3.Color can be varied by the controller needs to be adjusted according to the customer.
4.Long life: average life expectancy of 50,000 hours.
5.Cutting, welding facilitate freedom: each group of LED to form a loop, you can cut off any tangent meet customer requirements and demand for welding various lengths of light bar along the top.
6.Soft: A soft FPCB board as a substrate, can butt, bending, cutting, and easily fixed to unsmooth surface.
7.Light, thin: suitable for installation in narrow space inside

Please pay attention:

IP30 Non-waterproof

IP65 Waterproof in silicon coating

IP67 Waterproof in silicon tube

 

Share the products:
Facebooktwittergoogle_pluspinterestlinkedinmail
1-10 Meters 16$
10-100 Meters 15.8$
100-1000 Meters 15.5$
Bullet

HX-SZ100-WP-DIM LED Dimmer with RF wireless full touch wall panel HX-SZ100-WP-DIM, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring…

Description

LED Dimmer with RF wireless full touch wall panel
HX-SZ100-WP-DIM, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. There are 3 dynamic modes in the mode button, and the speed is adjustable. Further, it can be easily connected by RJ45 to achieve all units work synchronization.

Product Feature

●Adopt PWM technology, smooth and flicker-free.
●Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value.
●High watt output design, up to 300W.
●Easy connection to achieve multiple dimmers sync-work by RJ45 terminal.
●2-year warranty.

Technical Parameters

Receiver (HX-SZ100 (DIM)):

Working temperature -20-60℃
Supply voltage DC12V~24V
Output 3 channels(Sync)
External dimension L127*W41*H32 (mm)
Packing size L49*W39*H143 (mm)
Net weight 150g
Gross weight 170g
Output gray 256 levels
Max. Output current <25A
Max. Output power 300W

Wall-panel remote control (HX-SWB-DIM):

Working voltage AC90-265V(50/60Hz)
RF frequency 433.92MHz
Transmission distance up to 30m(the deviation depend on the environment)
Working power <2W
Standby power <0.2W
Ambient temperature 0-45℃
Dimension 86*86*40mm
Packing dimension L89*W40*H89mm
N.W 130g
G.W 140g
Output power 12V:<144W,24V:<288W

Interface Specifications

Wall-panel Installation Method

1)Opening: Gently pry gaps in touch panel with a screwdriver, and remove the panel slowly, as shown below:

2)Unplug the connector, connect the power cord, and fix the base part in the 86*86 installation box ( user need to prepare the installation box by themselves) on the wall with screws.

3)Reconnect the two parts of panel, and cover the face part on the base part to complete the installation.

Direction for use

Adopts RF full touch control, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key Instruction Remarks
ON ON in any time
Off OF LEDs in any time
Mode The mode will move to next, when touch the key each time 3 modes in total.
Speed/Brightness + The Speed/Brightness will +1, whentouch the key each time Speed for dynamic modes, Brightness for static modes.
Speed/Brightness – The Speed/Brightness will -1, when touch the key each time Speed for dynamic modes, Brightness for static modes.
Dimming Ring Touch any brightness which you want

3 modes in total as below:

NO Patterns Remarks
1 Static 100% light Brightness is adjustable, speed is unadjustable
2 flash Speed is adjustable, brightness is unadjustable
3 fade

Important: As RF signal sender, pair the wall panel to the receiver before use. The operation instruction as below:

1.Step 1: Press and hold the “Mode” key before the “RF LED Driver” powering on, the RF signal light lights red. And power up the “RF LED Driver”, and the LEDs will output 50% brightness (Tip: if the output does not output 50% brightness, indicating that the code learning is not successful, need to repeat the step 1).
2.Step 2: Press the “ON” key, then the LEDs will be 25% brightness.
3.Step 3: Press the “Mode” key again, then the LEDs will be 5% brightness.
4.Step 4: Press the “ON” key again,then the LEDs will be 100% brightness,and indicating the successful code learning. If not, repeat from step 1.
Mode-ON-Mode-ON

Typical Applications

Conjunction Diagram:

Application Diagram:

Product information for placing order

Product name Item number
LED Dimmer with RF wireless full touch wall panel HX-SZ100-WP-DIM
Payment Policy

the part for the contents of Payment

Shipping Policy

This part for Shipping Policy

Return Policy

This part for the contents of Return Policy

More Details

Applications: 
• Widely used for home, hotels, clubs, shopping malls.
• Architectural decorative lighting, boutique atmosphere lighting
• Extensively applied in Back-lighting, concealed lighting
• Emergency & security lighting, advertisement sign lighting
• Holiday, event, show exhibition decoration.

Installation Instructions: 
• Clean the surface you intend to stick the light strip to
• Peel off the backing strip off the 3M adhesive tape
• Press and hold the light strip firmly against the surface
• Connect the 4-Pin input of the light strip to the 4-Pin output of the Controller
• Connect the DC jack output of the power adapter to the DC jack input of the Controller
• Remove the tab from the battery compartment of the remote control
• Connect your power adapter to your wall outlet. Your light strip is now ready to use.

 

Send Inquiry
Video
Copyright © 2016 Shenzhen Gengyuan Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution