milight

Mokungit Led Touch Panel Dimmer LED Touch Dimmer 12v

Find on our online store:

ali express amazon ebay

Features:

1.The control principle: an IC control an LED form a loop (a), the controller IC on the FPCB through the control circuit inside the control to control the LED lights change different effects; such as flashing, chasing, jumping, Happy clockwise, counterclockwise Happy, Happy monochrome, color Happy, single chase from start to finish, running water, simulated lightning; changing effect this section is not limited to the current light bar controller built-in 94 kinds of effects can be based on customer needs , write your own; arranged in the form of screen can display, text, letters, pictures, animations, and so on.
2.Environmental safety: high quality highlight SMD 5050 LED. With small power consumption, resulting in less heat, no glare, impact resistance and other characteristics. Low voltage DC 5V power supply, high security and reliability.
3.Color can be varied by the controller needs to be adjusted according to the customer.
4.Long life: average life expectancy of 50,000 hours.
5.Cutting, welding facilitate freedom: each group of LED to form a loop, you can cut off any tangent meet customer requirements and demand for welding various lengths of light bar along the top.
6.Soft: A soft FPCB board as a substrate, can butt, bending, cutting, and easily fixed to unsmooth surface.
7.Light, thin: suitable for installation in narrow space inside

Please pay attention:

IP30 Non-waterproof

IP65 Waterproof in silicon coating

IP67 Waterproof in silicon tube

 

Share the products:
Facebooktwittergoogle_pluspinterestlinkedinmail
1-10 Meters 16$
10-100 Meters 15.8$
100-1000 Meters 15.5$
Bullet

Product Description HX-SZ600-DIM-WP, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt handheld wireless touch remote control and Wall-mounted touch panel remote control. 5 function buttons and 1 dimming ring in…

Description

Product Description
HX-SZ600-DIM-WP, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt handheld wireless touch remote control and Wall-mounted touch panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which been touched. As the led strip is the same. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the synchronization of more lamps, RGB Amplifier can be used.
Technical Parameters

Working temperature -20-60℃
Controller supply voltage DC5V,12V~24V
Wall panel supply voltage AC90~265V
0utput 3 channels
Connecting mode common anode
External dimension L91*W88*H24 mm
Packing size L106*W106*H66 mm
Net weight 270g
Gross weight 300g
Output gray 256 levels (RGB each)
Output current <8A(each channel)
Output power 12V:<288W,  24V:<576W
Frequency of RF remote control 433.9MHz

External Dimension

Interface Specifications

Direction for use
Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
RF remote control 1:
This product adopts RF full touch control, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key Instruction Remarks
ON/OFF ON or OFF in any time
Pause Pause or Continue
Mode The mode will move to next, when touch the key each time 3 modes in total.
Speed/Brightness + The Speed/Brightness will +1, when  touch the key each time Speed for dynamic modes, Brightness for static modes.
Speed/Brightness – The Speed/Brightness will -1, when touch the key each time Speed for dynamic modes, Brightness for static modes.
Color Ring Touch any color temperature which you want

3 modes in total as below:

NO Patterns Remarks
1 Static 100% light Brightness is adjustable, speed is unadjustable
2 flash Speed is adjustable, brightness is unadjustable

RF remote control 1:
This product adopts RF touch wall panel,, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key Instruction Remarks
ON/OFF ON or OFF in any time
Pause Pause or Continue
Mode The mode will move to next, when touch the key each time 3 modes in total.
Speed/Brightness + The Speed/Brightness will +1, when  touch the key each time Speed for dynamic modes, Brightness for static modes.
Speed/Brightness – The Speed/Brightness will -1, when touch the key each time Speed for dynamic modes, Brightness for static modes.
Color Ring Touch any color temperature which you want

3 modes in total as below:

NO Patterns Remarks
1 Static 100% light Brightness is adjustable, speed is unadjustable
2 flash Speed is adjustable, brightness is unadjustable
3 fade

RF remote control 3:

Name of key Instruction
ON ON in any time
OFF OFF in any time
Mode 100% brightness
Brightness + The Brightness will +1, when touch the key each time
Brightness – The Brightness will -1, when touch the key each time
Color Ring Touch any brightness which you want

Typical Applications
Application Circuit1:

Application Circuit2: (Synchronization function with network Line )

Notes
1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V.
2. Lead wire should be connected correctly according to grade that connecting diagram offers.
3. This product is not to overload;
4. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.
Common Problems

Problems Possible cause Solution
1.Lamp does not light after power Power cord is not properly connected, or there is not output switching power supply Connect the power cord properly or replay the power
Lamp power cord is not connected or short circuit Connected lighting power cord
2. After connecting some of the load the controller does not work The connected load is too large,so that it has burned in some of the components of the controller Replace parts of components or replace the controller
Payment Policy

the part for the contents of Payment

Shipping Policy

This part for Shipping Policy

Return Policy

This part for the contents of Return Policy

More Details

Applications: 
• Widely used for home, hotels, clubs, shopping malls.
• Architectural decorative lighting, boutique atmosphere lighting
• Extensively applied in Back-lighting, concealed lighting
• Emergency & security lighting, advertisement sign lighting
• Holiday, event, show exhibition decoration.

Installation Instructions: 
• Clean the surface you intend to stick the light strip to
• Peel off the backing strip off the 3M adhesive tape
• Press and hold the light strip firmly against the surface
• Connect the 4-Pin input of the light strip to the 4-Pin output of the Controller
• Connect the DC jack output of the power adapter to the DC jack input of the Controller
• Remove the tab from the battery compartment of the remote control
• Connect your power adapter to your wall outlet. Your light strip is now ready to use.

 

Send Inquiry
Video
Copyright © 2016 Shenzhen Gengyuan Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution