3.2FT 1M DC5V APA102 addressable 5050 full color flexible led pixel strip,IP30 Non-waterproof,144pcs APA102-5050 LED/M with 144 pixels;Black PCB wire;with DATA and CLOCK seperately

Find on our online store:

ali express amazon ebay


1.The control principle: an IC control an LED form a loop (a), the controller IC on the FPCB through the control circuit inside the control to control the LED lights change different effects; such as flashing, chasing, jumping, Happy clockwise, counterclockwise Happy, Happy monochrome, color Happy, single chase from start to finish, running water, simulated lightning; changing effect this section is not limited to the current light bar controller built-in 94 kinds of effects can be based on customer needs , write your own; arranged in the form of screen can display, text, letters, pictures, animations, and so on.
2.Environmental safety: high quality highlight SMD 5050 LED. With small power consumption, resulting in less heat, no glare, impact resistance and other characteristics. Low voltage DC 5V power supply, high security and reliability.
3.Color can be varied by the controller needs to be adjusted according to the customer.
4.Long life: average life expectancy of 50,000 hours.
5.Cutting, welding facilitate freedom: each group of LED to form a loop, you can cut off any tangent meet customer requirements and demand for welding various lengths of light bar along the top.
6.Soft: A soft FPCB board as a substrate, can butt, bending, cutting, and easily fixed to unsmooth surface.
7.Light, thin: suitable for installation in narrow space inside

Please pay attention:

IP30 Non-waterproof

IP65 Waterproof in silicon coating

IP67 Waterproof in silicon tube


Share the products:
1-10 Meters 16$
10-100 Meters 15.8$
100-1000 Meters 15.5$


  • DC5V,3.2Ft (1Meter)/Roll. With Self-adhesive back tape for safe and easy application
  • Non-waterproofIP30, perfect for home and business lighting decoration
  • Eco friendly, uses very little energy and fits just about any space you can imagine
  • LED Type: High Quality 5050 SMD LED, high intensity and reliability
  • Completely smooth and even light spread, solving the uneven luminous problem with a chain of fluorescent tubes.

• LED source :5050SMD RGB built-in APA102 chipset
• IC Type:APA102

  • Chip: Epistar chip
    • Gray scale: 256
  • Pixels :144/Meter
    • LED Quantity: 144leds/Meter (each LED is separately controlled)
  • IC Quantity: 144IC/Meter (1 IC drives 1 led chip)
    • Viewing angle: 120 °
  • Sheet: FPCB
    • Color: Full color RGB , can be adjusted
    • Standard Operating Voltage: DC 5V
  • Drive Mode:Constant Voltage
    • Output Power: 43.2W/M
  • FPCB board Dimensions: Width: 12mm, thickness:2.0mm
  • Waterproof Rate:IP30 Non-waterproof
    • FPCB color: Black
  • Working Tempreture:-20° to 60°
  • Cuttable: every LED is cuttable
    • Packing: 1m/roll, static bag packaging
    • Supporting Symphony controller T-1000S
Payment Policy

the part for the contents of Payment

Shipping Policy

This part for Shipping Policy

Return Policy

This part for the contents of Return Policy

More Details

• Widely used for home, hotels, clubs, shopping malls.
• Architectural decorative lighting, boutique atmosphere lighting
• Extensively applied in Back-lighting, concealed lighting
• Emergency & security lighting, advertisement sign lighting
• Holiday, event, show exhibition decoration.

Installation Instructions: 
• Clean the surface you intend to stick the light strip to
• Peel off the backing strip off the 3M adhesive tape
• Press and hold the light strip firmly against the surface
• Connect the 4-Pin input of the light strip to the 4-Pin output of the Controller
• Connect the DC jack output of the power adapter to the DC jack input of the Controller
• Remove the tab from the battery compartment of the remote control
• Connect your power adapter to your wall outlet. Your light strip is now ready to use.


Send Inquiry

Copyright © 2016 Shenzhen Gengyuan Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution