1.Brightness adjusting: to adjusting all controllers, first press “Master ON” or to adjusting individual controllers, then press “Zone ON”;secondly set the adjustment for brightness.
2.Night light mode: for individual controllers, press and hold the “Zone OFF” from one of the 4 zones,For all controllers,press and hold “Master OFF”, The lights now consume only 0.4 watts.
3.Resume function: The previous setting will be resumed while power on again!
4.Matching Code: Press one of the “Zone ON” buttons one time within 3 seconds when power on again,the light will blink 3 times if matching is successful;
5.Clearing Code: Press one of the “Zone ON” buttons five times within 3 seconds when power on again,the light will blink ten times if clearing is successful;
6.Grouping: You can add an endless numbers of controllers t a zone on the 4 channel remote by code-matching to different zones.This way you are completely flexible in creating different group combinations.Below you can see some grouping examples.
the part for the contents of Payment
This part for Shipping Policy
This part for the contents of Return Policy